DriveRack PA2 Control for Android
Wireless DriveRack PA2 Control for on-site loudspeaker tuning
- Free
- 4
- V 1.1.5
Wireless DriveRack PA2 Control for on-site loudspeaker tuning
Remotely tune every DriveRack PA2 processing parameter from an Android device while moving around a venue on a local Wi-Fi network. Harman Professional Inc.'s DriveRack PA2 Control mirrors the hardware's processing and brings AutoEQ and Advanced Feedback Suppression into a phone-based workflow. The app targets live sound engineers, gigging musicians, and venue operators who need to measure and adjust PA performance from audience positions.
What is DriveRack PA2 used for?
The app gives full remote management of the dbx DriveRack PA2 loudspeaker management system, exposing signal processing that is normally set at the rack. AutoEQ runs automatic room equalization with an RTA microphone, and AFS performs feedback suppression while preserving tone. That lets an engineer apply compressor, graphic EQ, parametric EQ, and crossover changes without returning to the hardware unit.
How does the app connect and handle setup?
Connection requires a local Wi-Fi network and a DriveRack PA2 wired to the router, so the Android device and hardware share the same network. The app includes step-by-step setup wizards that guide speaker configuration and tuning, and the interface supports device discovery when needed. This networked approach removes the need for a direct cable run to the processor during tuning sessions.
How effective is on-site tuning and real-time monitoring?
Mobility matters: you can move to different seats to judge tonal balance because the app mirrors the PA2's meters and processing in real time. Real-time input and output meters show level changes as you adjust settings, and AutoEQ plus AFS automate complex calibration steps, reducing manual parametric trimming. What's more, crossover routing for 2-way or 3-way systems is controllable from the same view.
Is the app aimed at professionals or casual users?
The app targets live sound professionals and performing musicians who use the PA2 hardware; its tools reflect that focus, offering automatic and manual tuning paths. The setup wizards lower the entry barrier for less technical users, while the full access to compression, EQ, and crossover parameters gives experienced engineers the control they expect. Known constraints include a landscape-only interface that some users mention.
In conclusion, a practical remote tool for DriveRack PA2 operators
DriveRack PA2 Control suits professionals who need to tune a PA from audience positions, because it exposes the hardware's processing and meters over Wi-Fi. The app reduces trips to the rack and makes AutoEQ and AFS available on a mobile device. Expect a landscape-only interface and occasional manual discovery steps when launching the app.
Pros
- Full remote access to all DriveRack PA2 processing parameters
- AutoEQ performs automatic room equalization with an RTA mic
- AFS removes feedback while preserving tonal character
- Real-time input/output meters visible on the Android device
Cons
- Locked to landscape orientation
- Requires DriveRack PA2 hardware and a shared local Wi-Fi network
- May need manual device discovery on launch
Also available in other platforms
DriveRack PA2 Control for Android
- Free
- 4
- V 1.1.5